73

OTHER RECORDING FUNCTIONS

NOTE

• The initial default setting is “REC Mode”.

When you want to assign this function to
[왗] and [왘] keys:
Recording mode
•[왗] and [왘] cycle through recording
modes.
• EX-S20U: Snapshot, BESTSHOT
• EX-M20U: Snapshot, BESTSHOT,
Snapshot Audio, Voice Recording
(page 168)
Flash mode
•[왗] and [왘] cycle through the flash
mode settings (page 47).
EV shift
•[왗] decreases compensation, [왘]
increases compensation (page 55).
White balance setting
•[왗] and [왘] cycle through white
balance settings (page 56).
ISO sensitivity
•[왗] and [왘] cycle through ISO
sensitivity settings (page 70).
No function assigned
Select this:
REC Mode
Flash
EV Shift
White Balance
ISO
Off
Assigning Functions to the [왖] and [왔]Keys

A “key customization” feature lets you configure the [왖]

and [왔] keys so they change camera settings whenever

they are pressed in the REC mode. After you configure the

[왖] and [왔] keys, you can change the setting assigned to

them without going through the menu screen.

1.
In the REC mode, press [MENU].
2.

Select the “REC” tab, select “U/D Key”, and

then press [왘].
3.
Use [왖] and [왔] to select the setting you
want, and then press [SET].