OTHER RECORDING FUNCTIONS
Specifying Power On Default Settings
The camera’s “mode memory” feature lets you specify the power on default settings individually for the recording mode, flash mode, digital zoom mode, and white balance mode. Turning on mode memory for a mode tells the camera to remember the status of that mode when you turn off the camera, and restore it the next time you turn the camera back on. When mode memory is turned off, the camera automatically restores the initial factory default setting for the applicable mode.
The following table shows what happens when you turn mode memory on or off for each mode.
Mode | Mode Memory Off | Mode Memory On | |
(Factory Default) | |||
|
| ||
|
|
| |
Recording Mode | Snapshot | • Remembers the | |
|
| current status | |
Flash Mode | Auto | ||
when the camera | |||
|
| ||
Digital Zoom |
| ||
On | is turned off, and | ||
Mode | |||
restores it when | |||
| |||
|
| ||
White Balance |
| the camera is | |
Auto | turned back on | ||
Mode | |||
| again. | ||
|
| ||
|
|
|
1.In the REC mode, press MENU.
2.Select the “Memory” tab, select the item you want to change, and then rock the controller to the right.
3.Rock the controller up or down to select the setting you want, and then click.
To do this: | Select this setting: | |
Turn on mode memory so settings | On | |
are restored at power on | ||
| ||
|
| |
Turn off mode memory so settings | Off | |
are initialized at power on | ||
| ||
|
|
52