OTHER RECORDING FUNCTIONS

1.In the REC mode, press MENU.

2.Select the “REC” tab, select “REC Mode”, and then rock the controller to the right.

3.Rock the controller up or down to select (Snapshot Audio), and then click.

This enters the Snapshot Audio Mode.

4.Press the shutter release button to record the image.

After the image is recorded, the camera

enters audio recording standby, with the image

you just recorded on the Remaining recording time monitor screen.

You can cancel audio recording standby by pressing MENU.

5.Press the shutter release button to start audio recording.

The operation/flash charge lamp flashes green as re- cording is performed.

Even if you have the monitor screen turned off (page 50), the monitor screen turns on while you are adding audio to a snapshot.

6.Recording stops after about 30 seconds or when you press the shutter release button.

48