JTP90SP
GE® 30" Built-In Double Microwave/Thermal Wall Oven
Dimensions and Installation Information (in inches)
CABINET
WIDTH
20''
KW Rating
240V 6.4
208V 5.6
Breaker Size
240V | 30 Amps |
208V | 30 Amps |
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
Suitable bracing to support runners
C |
L |
over centerline 
of cabinet
(must support 275 lbs.)
2 x 4 or equivalent runners
F A 
30''
CUTOUT
WIDTH
C
CONDUIT
CUTOUT DEPTH |
JUNCTION BOX |
LOCATION |
A |
CUTOUT |
HEIGHT |
28'' |
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.
Cabinet | 30" |
A – Overlap of oven over side of edges of cutout | 11/16" |
B – Overlap of oven at top and bottom of cutout | 1" |
C – Overall of oven at top of cutout | 1/2" |
Oven |
|
D – Overall depth* | |
E – Overall height with trim | 44" |
Overall height without trim | |
E |
*Depth including door handle is approximately
21" Minimum
Door Allowance DOOR MUST BE
REMOVED BEFORE
INSTALLATION
E
B
D
Minimum cutout location
from the floor
Note: These ovens are not approved for stackable or
21''
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST
Listed by
Underwriters
Laboratories
Specification Created 5/09 | 320223 |
