OTHER SETTINGS

To set the volume level

Specifying an Image for the Startup Screen
1. Press [MENU].

You can specify an image you recorded as the startup

screen image, which causes it to appear on the monitor

 

2. Select the “ Set Up” tab, select “ Sounds” , and

screen for about two seconds whenever you press the

power button or [ ] (REC) to turn on the camera. The

then press [].

startup screen image does not appear if you press [ ]

3.Use [] and][ to select“ Volume” .

(PLAY) to turn on the camera.

 

4.Use [] and][ to specify the volume setting1. Press [MENU]. you want, and then press [SET].

2.Select the “ Set Up” tab, select “ Startup” , and

• You can set the volume in the range of 0 (no sound)

then press [].

 

 

to 7 (loudest).

 

 

 

 

 

 

 

3.Use [] and][ to display the image yo

 

to use as the startup image.

 

4.Use [] and][ to change the setting,

 

then press [SET].

 

 

 

 

 

 

 

 

 

To do this:

Select this setting:

 

 

 

 

 

 

 

 

Use the currently displayed image

On

 

 

 

as the startup screen image

 

 

 

 

 

 

 

 

 

 

 

 

Disable the startup screen

Off

 

 

 

 

 

 

133