OTHER RECORDING FUNCTIONS

Using Manual Focus

With the Manual Focus mode, you can adjust the focus of an image manually. The following shows focus ranges in the Macro mode.

Range: 17cm (6.7˝) to infinity ()

1. Press [] () to cycle through the focus mode settings until ” is shownas the focus mode indicator.

• At this point, a

boundary also appears

Boundary

on the display, indicating the part of the image that will be used for manual focus.

2.While watching theimage on the monitor screen, use [ ] and [] to focus.

 

Manual focus position

 

 

 

To do this:

Do this:

 

Focus in on the subject

Press [].

 

 

 

 

Focus out on the subject

Press [].

 

 

 

 

Pressing [] or [] causes the area inside of the boundary displayed in step 1 to fill the monitor screen momentarily to aid in focus. The normal image will reappear a short while later.

3.Press the shutter button to record the image.

IMPORTANT!

In the Manual Focus mode, the [] and [] keys adjust focus, even if you used key customization to assign other functions to them (page 103).

73