OTHER SETTINGS

Specifying the File Name Serial Number

 

Using the Alarm

Generation Method

 

 

 

You can configure up to three alarms that cause the

Use the following procedure to specify the method for

 

 

camera to beep and display a specified image at the time

generating the serial number used for file names (page 126).

 

you specify. Specifying a movie or an audio snapshot plays

 

 

 

 

 

back the image and the audio at the assigned time.

1. Press [MENU].

 

 

 

Specifying a voice recording file plays the audio.

 

 

 

 

 

• You can configure up to three alarms, named “Alarm 1”,

2. Select the “ Set Up” tab, select “ File No.” , and

 

“Alarm 2”, and “Alarm 3”.

then press [].

 

 

 

1. In the PLAY mode, press [MENU].

3.Use [] and][ to change the setting,

 

 

and

then press [SET].

 

 

 

2. Select the “ PLAY” tab, select “ Alarm” , and

 

 

 

 

 

then press [].

 

To do this for a newly saved file:

Select this setting:

 

 

3.Use [] and][ to select the alarm (1,

 

 

 

 

 

 

Store the last file number used and

 

 

 

 

increment it, regardless of whether

Continue

 

 

whose setting you want to configure

 

files are deleted or whether the

 

 

then press].[

 

memory card is replaced with a new

 

 

 

 

 

 

 

 

 

one

 

 

 

4.Use [] and][ to select the setting y

 

 

 

 

 

 

Find the highest file number in the

 

 

 

 

Reset

 

 

to change, and then] useand][ to

 

current folder and increment it

 

 

 

 

 

 

 

change the selected setting.

 

 

 

 

 

 

 

 

 

 

• You can set an alarm time and configure the alarm to

 

 

 

 

 

sound only once (Once) or at the same time

 

 

 

 

 

everyday (Daily). You can also turn the alarm on or

 

 

 

 

 

off.

 

 

 

 

 

 

136