Step 1: Shoot the subject.
Dynamic Photo images are created by extracting the subject out of one image, and inserting it into another image (snapshot or movie). The term “subject” as used here refers to what you extract or crop out of the first image. Perform the following steps to shoot and extract the subject.
To extract the subject, you shoot once with the subject against a background. Then you shoot the same background again, this time without the subject.
(Shoot twice.)
1With the subject | 2The same angle against the same | The camera will extract |
| background, without the subject. | the subject automatically. |
| Do not allow the camera to move. |
|
1.Press [r] (REC) to turn on the camera and then press [SET].
2.Use [8] and [2] to select the bottom Control
Panel option (BS) and then press [SET].
3.Select “Dynamic Photo”.
On the BEST SHOT scene menu screen, select “Dynamic Photo”, which is the second scene.
Use [4] and [6] to move the red frame 
to 
and then press the [SET] button.
5 | Creating a Dynamic Photo Image |
|