IMPORTANT!

•When you edit a movie, only the result is saved. The original movie is not retained. Once you perform an editing operation, you will not be able to undo it.

•A movie that is shorter than five seconds cannot be edited.

•The movie editing operation is supported only for movies that were recorded with this camera.

•You will not be able to edit a movie if the amount of remaining memory capacity is less than the size of the movie file you want to edit. If there is not enough memory available, delete any files you no longer need to free up more.

•Cutting a movie into two parts or splicing of two movies in to a single movies cannot be performed on the camera.

■Editing with To-Point Cut or From-Point Cut

1.Play back the movie you want to edit.

2.Press [SET] to pause playback.

• Check to make sure that “ ” (cut icon) is displayed on the monitor screen. If it isn’t, press [SET] again.

Cut icon

3.Press [T].

•You could also perform the following steps in place of steps 1 through 3 above.

1In the PLAY mode, select the movie you want to edit

and then press [MENU].

2On the “PLAY” tab, select “Movie Editing” and then press [X].

167

EDITING IMAGES