■Connecting the Camera to Your Computer after the First Time

Since you need to install the USB driver and configure menu settings only the first time you connect the camera to your computer, later connections are much simpler.

1.Press the camera’s [ON/OFF] button to turn it off and then place the camera on the USB cradle.

•Do not place the camera onto the USB cradle while it is turned on.

•If you plan to transfer images from the camera’s built-in memory to your computer, make sure there is no memory card loaded in the camera.

2. Press the USB cradle’s [USB] button.

• Pressing the cradle’s [USB] button puts it into the USB mode, which is indicated by the USB lamp lighting green.

[USB]

■Viewing Camera Images on Your Computer

After connecting the camera to your computer, you can view camera images on your computer screen.

•For information about connecting to a computer, see “Connecting the Camera to Your Computer after the First Time” on page 221.

1.Windows XP users: Click “Start” and then “My Computer”.

Windows 2000/Me/98SE/98 users: Double- click “My Computer”.

2.Double-click “Removable Disk”.

•Your computer recognizes the memory card loaded in the camera (or built-in memory if there is no card) as a removable disk.

3.Double-click the “DCIM” folder.

4.Double-click the folder that contains the image you want to view.

221

USING THE CAMERA WITH A COMPUTER