7.In response to the confirmation message that appears, use [S] and [T] to select “Yes” and then press [SET].

•To cancel movie editing, select “No” instead of “Yes” and then press [SET]. This will return to the paused movie playback screen.

•The selected cut operation will take considerable time to complete. Wait until the “Busy... Please wait...” message disappears from the monitor screen before performing any operation on the camera. Note that a cut operation can take a very long time if the movie being edited is long.

■Using Point-To-Point Cut

1.Play back the movie you want to edit.

2.Press [SET] to pause playback.

Cut icon

3.Press [T].

•You could also perform the following steps in place of steps 1 through 3 above.

1 In the PLAY mode, select the movie you want to edit

and then press [MENU].

2On the “PLAY” tab select “Movie Editing” and then press [X].

169

EDITING IMAGES