Problem

 

Possible Causes and Action

Other

 

 

 

The wrong date and time are

The date and time setting is off. Set the correct date and time (page 181).

 

displayed.

 

 

 

 

 

 

The messages on the display

The wrong display language is selected. Change the display language setting (page 185).

 

are in the wrong language.

 

 

 

 

 

 

 

I can’t transfer images over a

1)

The USB cable may not be connected securely. Check all connections.

 

USB connection.

2)

USB driver may not be installed. Install the USB driver (page 203).

 

 

3)

The USB driver may have been installed incorrectly. Reinstall the USB driver correctly (page 203).

 

 

4)

The wrong USB communication protocol may be selected. Select the correct USB communication

 

 

 

protocol in accordance with the type of device you are connecting (page 187).

 

 

5)

If the camera is not turned on, turn it on.

 

 

 

 

 

Display language setting

1)

You did not configure initial settings after purchasing the camera or the battery may have been left with

 

screen appears when the

 

a dead battery. Check the camera setup (pages 11, 185).

 

camera is turned on.

2)

The may be a problem with the camera’s built-in memory management area. If this is the case, perform

 

 

 

the reset operation to initialize the camera’s setup (page 133). After that, configure each setting. If the

 

 

 

language selection screen does not re-appear when you turn the camera on, it means that the camera’s

 

 

 

built-in memory management area has been restored.

 

 

 

If the same message appears after you turn power back on, contact your retailer or a CASIO service

 

 

 

center.

 

 

 

 

241

APPENDIX