Recording with Zoom Continuous Shutter
1.Use [S], [T], [W], and [X] to move the selection boundary around the image of the subject on the left side of the monitor
screen until it is
located at the part you want to enlarge, and then press [SET].
This will enlarge the area within the boundary and display it in the right side of the monitor screen.
2.Press the shutter button to shoot.
Both the left image and the right image will be recorded.
IMPORTANT!
•Note that with zoom continuous shutter, you do not need to keep the shutter button depressed.
•Digital zoom is disabled while shooting with zoom continuous shutter.
•Zoom continuous shutter is not available when the image size setting is 3:2 (3648 × 2432 pixels) or 16:9 (3648 × 2048 pixels).
•When the image size setting is 10M (3648 × 2736 pixels) or 5M (2560 × 1920 pixels), the size of the zoomed image produced by zoom continuous shutter is 3M (2048 × 1536 pixels).
•When Auto Focus is selected as the focus mode, the metering mode automatically switches to “Spot” (pages 108, 120) and locates the Auto Focus area in the center of the Zoom Continuous Shutter selection boundary.
80
SHOOTING A SNAPSHOT