Snapshot Tutorial

Using the Control Panel

The Control Panel can be used to configure camera settings.

1.In the REC mode, press [SET].

This will cause a Control Panel to appear along the right side of the monitor screen. The settings available for the currently selected Control Panel also appear. You can use the control panel to configure various camera settings.

If “On” is selected for the Panel setting (page 97), the Control Panel is always displayed along the right side of the monitor screen.

Available settings

Control Panel

[8] [2] [4] [6] [SET]

1

2

3

4

5 6

7

8 9

2.Use [8] and [2] to select the setting you want to change.

1Image size/Quality* (pages 24, 58)

6White balance (page 32)

2Flash (page 26)

7EV shift (page 34)

3Face detection (page 28)

8easy Mode (page 35)

4Anti shake (page 30)

9Date/Time (page 38)

5ISO sensitivity (page 32)

 

*Image quality cannot be changed using the Control Panel.

3.Use [4] and [6] to change the setting.

4.If you want to configure another setting, repeat steps 2 and 3.

5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.

NOTE

You also can configure settings other than those listed above (page 47).

The Control Panel cannot be displayed while an easy mode, or Voice Recording Operation is in progress.

23

Snapshot Tutorial