OTHER RECORDING FUNCTIONS

3. Use [￿] and [￿] to

Remaining recording time

select “ Movie”,

 

 

and then press [SET].

 

 

 

 

Recording time

4. Point the camera at

Movie recording indicator

the subject and then

 

 

press the shutter

 

 

release button.

 

 

Movie recording continues as long as remaining memory capacity allows, or until you stop it by pressing the shutter release button again.

Starting a movie record operation causes optical zoom to be disabled. Only digital zoom is available while a movie record operation is in progress. If you want to use optical zoom to record a movie, perform the zoom operation before starting the record operation.

The remaining recording time value counts down on the monitor screen as you record.

The focus mode automatically changes to Pan Focus (page 64) when you enter the Movie mode, regardless of the mode memory’s (page 90) Focus setting. You can, however, change to another focus mode before starting a recording.

5.When movie recording is complete, the movie file is stored in file memory.

IMPORTANT!

The flash does not fire in the Movie mode.

This camera also records audio. Note the following

points when recording a movie.

— Take care that you do

not block the microphone with your

fingers.

Good recording results are not

possible when the

 

camera is too far from

Microphone

the subject.

Operating camera buttons during recording can cause button noise to be included in the audio.

Movie audio is recorded in monaural.

80

Page 80
Image 80
Casio EX-Z30 manual Select Movie Then press SET, Point the camera at, Subject and then Press the shutter Release button