Casio EX-Z30 manual Recording an Image, Change the REC Mode setting to Snapshot

BASIC IMAGE RECORDING

Recording an Image

Your camera automatically adjusts shutter speed in accordance with the brightness of the subject. Images you record are stored in the camera’s built-in memory, or to a memory card if you have one loaded in the camera.

•When an optionally available SD memory card or MultiMediaCard (MMC) is loaded in the camera, images are stored on the card (page 136).

1.Press the power button or the [] (REC) button to turn on the camera.

[]

N/OFF

Power button

•This causes an image or a message to appear on the monitor screen.

•This enters the REC mode for image recording.

•If the camera is in the PLAY mode when it turns on, the message “There are no files” will appear if you do not have any images stored in memory yet. In

addition, the icon will be visible at the top of the display. If this happens, press [] (REC) to enter the REC mode.

2.Change the “REC Mode” setting to “ Snapshot”.

•Press [MENU], use the cursor keys to select the “REC” tab and then “REC Mode”, press [￿], select “ Snapshot”, and then press [SET]. For details, see “Using the On-screen Menus” (page 39).

•The (Snapshot Mode) icon is displayed on the monitor screen while the Snapshot Mode is selected.

•You can also use the key customization feature to assign the mode change operation to the cursor

keys, so the “REC Mode” is changed whenever you press the [￿] or [￿] key (page 89).

46