OTHER RECORDING FUNCTIONS

4.Press the shutter release button to start voice recording.

The remaining recording time value counts down on the monitor screen and the green operation lamp flashes as recording is performed.

Pressing the [DISP] button during voice recording turns off the monitor screen. The monitor screen turns back on automatically when recording is complete.

You can insert index marks while recording by pressing [SET]. See page 106 for information about jumping to an index mark during playback.

5.Recording stops when you press the shutter release button, when memory becomes full, or when the battery goes dead.

NOTE

You can also enter the Voice Recording Mode by aligning the mode selector with “REC”, and holding down [DISP] as you press the power button to turn on the camera. In this case, the camera goes directly into the Voice Recording Mode without extending the lens.

Audio Recording Precautions

Keep the microphone on the

front of the camera pointed at the subject.

Take care that you do not block the microphone with your fingers.

Microphone

Good recording results are not possible when the camera is too far from the subject.

Operating camera buttons during recording can cause button noise to be included in the audio.

Pressing the power button or changing the mode selector setting stops recording at that point and stores any audio recorded up to that point.

You can also perform “after-recording” to add audio to a snapshot after recording it, and also change the audio recorded for an image. See page 104 for more information.

80

Page 80
Image 80
Casio EX-Z4 manual Audio Recording Precautions, Press the shutter release button to start voice recording