Casio EX-Z4 manual Cropping an Image

PLAYBACK

Cropping an Image

Use the following procedure when you want to crop a portion of an enlarged image and use the remaining part of the image as an e-mail attachment, Web page image, etc.

1.In the PLAY mode, use [ ] and [ ] to scroll through images and display the one you want to crop.

2.Press [MENU].

3.Select the “PLAY” tab, select “Trimming”, and then press [ ].

•This causes a cropping boundary to appear.

4.Use the zoom button () to make the cropping boundary larger or smaller.

•The size of the cropping boundary depends on the size of the image on the display.

5.Use [ ], [ ], [ ], and [ ] to move the cropping boundary up, down, left, or right until the area of the image you want to extract is within the boundary.

6.Press [SET] to extract the part of the image enclosed in the cropping boundary.

•If you want to cancel the procedure at any point, press [MENU].

IMPORTANT!

•Cropping an image creates a new file that contains the cropped image. The file with the original image also remains in memory.

•An image recorded using the 2304 x 1536 (3:2) pixel size cannot be cropped.

•Movie and voice recording file images cannot be cropped.

•An image recorded using another camera model cannot be cropped.

•If the message “This function is not supported for this file.” appears, it means that the current image cannot be cropped.

•The cropping operation cannot be performed if there is not enough memory to store the cropped image.

93