IMPORTANT!

Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or turn off Eye-Fi card communication (page 140) when on an aircraft or in any other location where use of wireless communication is limited or prohibited.

Loading an Eye-Fi card will cause the Eye-Fi indicator to

appear on the monitor screen. Its transparent or not transparent appearance indicates the communication status as shown below.

Transparent

Access point cannot be found or no transferable

image data exists.

 

Not transparent

Image transfer in progress

 

 

A communication icon will appear on the monitor screen while image data transfer is in progress.

The camera’s Auto Power Off (page 146) function is disabled while image data transfer is in progress.

A confirmation message will appear on the monitor screen if you try to turn off the camera while image data transfer is in progress. Follow the instructions in the messages (page 171).

Transfer of a large number of images can take some time to complete.

The original images remain on the Eye-Fi card after the image data transfer.

Recording a movie to an Eye-Fi card may result in movie frames being dropped.

Proper Eye-Fi card data communication may not be possible due to camera settings, battery level, or operating conditions.

C

135

Using the Camera with a Computer