Inserting a Subject into a Background Image (Dynamic Photo)
Use the following procedure to insert a subject into a background image. A Dynamic Photo with a moving subject is saved as a 2M (1600x1200 pixels) or smaller size image. A Dynamic Photo with a still subject is saved as a 6M (2816x2112 pixels) or smaller size image.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Dynamic Photo
1.Use [4] and [6] to select the background image you want and then press [SET].
•Only an image shot with this camera can be used as a background image. Note, however, images of the following sizes cannot be used.
– 3:2, 16:9
2.Use [4] and [6] to select the subject image you want to insert and then press [SET].
3.While watching the monitor screen, use [8], [2], [4], and [6] to adjust the insertion position of the subject. When it is located where you want, press [SET].
This inserts the subject into the background image and creates a Dynamic Photo.
•If the original still image into which a moving subject is inserted is smaller than 2M size, the Dynamic Photo will be the same size as the original.
•If the original still image into which a still subject is inserted is smaller than 6M size, the Dynamic Photo will be the same size as the original.
.To view a Dynamic Photo
1.Press [p] (PLAY) and then use [4] and [6] to display the Dynamic
Photo you want to view.
2.If the Dynamic Photo has a moving subject, press [SET].
•Subject movement is repeated as a continuous loop.
C | 112 | Other Playback Functions (PLAY) |
|