Snapshot Tutorial
Using the Control Panel
The Control Panel can be used to configure camera settings.
1.In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[8] [2] [4] [6] | Available settings Control Panel | |
| 1 | |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
[SET] | 8 | |
9 | ||
|
2.Use [8] and [2] to select the setting you want to change.
1Image size/Quality* (pages 31, 80) | 7Face |
2Flash (page 34) | (pages 42, 48) |
3AF Area (page 36) | 8EV shift (page 44) |
4Lighting (page 37) | 9Date/Time (page 45) |
5ISO sensitivity (page 38) |
|
6Continuous shutter (page 39) |
|
*Snapshot image quality cannot be changed using the Control Panel.
3.Use [4] and [6] to change the setting.
4.If you want to configure another setting, repeat steps 2 and 3.
5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.
NOTE
•You can configure the camera to turn off display of the Control Panel when you press [SET] (page 139).
•You also can configure settings other than those listed above (page 63).
•The Control Panel cannot be displayed while a Dynamic Photo, Prerecord Movie, For YouTube, or Voice Recording Operation is in progress.
C | 29 | Snapshot Tutorial |
|