APPENDIX
Using the USB Cradle to Print Images
You can place the camera onto the USB cradle and connect the cradle to a printer to print images.
1.Connect the USB cable that comes bundled with the camera to the USB cradle and a printer.
Connector A
Connector B
USB port
USB cable (bundled)
[
] (USB port)
•Also, connect the AC adaptor to the USB cradle and plug the AC adaptor into an electrical outlet.
•If you are using battery power without the AC adaptor, make sure that the battery is fully charged.
2.Turn off the camera, and then set the camera on the USB cradle.
3.Turn on the printer and then perform the procedure in the camera user’s guide to print.
4.After you are finished printing, press the USB cradle’s [USB] button, and then turn off the camera.
IMPORTANT! 
•Never disconnect the USB cable, or perform any camera or USB cradle operation while printing is in progress. Doing so causes a printer error.
240