.To print

1.Turn on the printer and load paper.

2.Turn on the camera.

This will display the print menu screen.

3.Use [8] and [2] to select “Paper Size”, and then press [6].

4.Use [8] and [2] to select a paper size and then press [SET].

•The following are the available paper sizes. 3.5"x5", 5"x7", 4"x6", A4, 8.5"x11", By Printer

•Selecting “By Printer” prints using a paper size selected on the printer.

•See the documentation that comes with your printer for information about paper settings.

5.Use [8] and [2] to specify the print option you want.

1 Image

:Prints one image. Select and then press [SET]. Next, use [4] and

 

[6] to select the image you want to print.

DPOF Printing :Prints multiple images. Select and then press [SET]. With this option, images will be printed in accordance with DPOF settings (page 120).

•To toggle date stamping on and off, press [BS]

(^). The date stamp will be printed when “On” is indicated on the monitor screen.

6.Use [8] and [2] to select “Print” and then press [SET].

Printing will start and the message “Busy... Please

wait...” will appear on the monitor screen. The message will disappear after a short while, even though printing is still being performed. Pressing any camera button will cause the printing status to re-appear. The print menu screen will re- appear when printing is complete.

•If you selected “1 Image”, you can repeat the procedure from step 5, if you want.

7.After printing is complete, turn off the camera and disconnect the USB cable from the printer and camera.

119

Printing