Manuals / Brands / Photography / Digital Camera / Casio / Photography / Digital Camera

Casio EXS3DBA ■If the camera works normally, ■If the camera does not work normally

1 50

Download 50 pages, 679.56 Kb

GETTING READY

•If the [CHARGE] lamp starts flashing red, it means that an error occurs while charging. An error can be caused by any of the following: a problem with the USB cradle, a problem with the camera, or a problem with the battery or how it is loaded. Remove the camera from the USB cradle and see if it works normally.

•You can use the USB cradle to charge the camera’s battery, to exchange data with a computer over a USB connection, or when using the Photo Stand feature only.

■If the camera works normally

1.Continue using the camera until the current charge is used up, and then charge the battery.

■If the camera does not work normally

This can mean there is a problem with how the battery is loaded.

1.Remove the battery from the camera and check the battery contacts for dirt. If the contacts are dirty, wipe them clean with a dry cloth.

2.Check to make sure that the AC adaptor’s power cord is connected securely to the power outlet and USB cradle.

•If the same symptoms occur again when you place the camera on the USB cradle after taking the above steps, contact a CASIO authorized service center.

28

Contents

Page INTRODUCTION Unpacking Contents 41BASIC IMAGE RECORDING 51OTHER RECORDING FUNCTIONS 70 PLAYBACK DELETING FILES FILE MANAGEMENT 97 OTHER SETTINGS 107 USING A MEMORY CARD 112VIEWING IMAGES ON A COMPUTER 127USING THE CAMERA WITH A COMPUTER 142 APPENDIX IMPORTANT ■Copyright Restrictions Features Page Precautions General Precautions Data Error Precautions Operating conditions Condensation LED Backlight Lens Other QUICK START GUIDE First, charge the battery To configure display language and clock settings To record an image To view a recorded image To delete an image GETTING READY About This Manual ■Terminology ■Button Operations ■On-screenText Camera ■Front ■Back ■Bottom USB Cradle Monitor Screen Contents REC mode PLAY mode Changing the Contents of the Monitor Screen Indicator Lamps Attaching the Strap Power Requirements To load the battery To charge the battery 2.Turn off the camera 3.Set the camera onto the USB cradle 4.After charging is complete, remove the camera from the USB cradle ■If the camera works normally ■If the camera does not work normally ■Battery Life Guidelines ■Tip to Make the Battery Last Longer ■Low Battery Indicator Power Supply Precautions ■Battery Handling Precautions Page ●PRECAUTIONS DURING USE ●BATTERY STORAGE PRECAUTIONS ●USING THE BATTERY ■USB Cradle and AC Adaptor Precautions Turning the Camera On and Off Auto Power Off (APO) Using the On-screenMenus 2.Press [MENU] ●Menu Screen Operations Page Configuring Display Language and Clock Settings To configure display language and clock settings 6. Use [] and [] to 8. Press [SET] to register the settings and exit change the date format the setting screen setting, and then press BASIC IMAGE RECORDING Recording an Image About the REC Mode Monitor Screen Recording Precautions Using Zoom 5.In the REC mode, use [] and [] to change the digital zoom factor 6.Record the image Using the Flash ■About Red-eyeReduction Flash Precautions Using the Self-timer Page Specifying Image Size and Quality To specify the image size To specify image quality