Casio EXS3DBA ■Battery Life Guidelines

GETTING READY

■Battery Life Guidelines

The battery life guideline values given below indicate the amount of time at standard temperature (25° C (77° F)) until power automatically turns off due to battery failure. They do not guarantee that the battery will provide the amount of service indicated. Low temperatures and continued use reduce battery life.

	Operation	Approximate Battery Life

	Continuous Recording*1	80 minutes (480 shots)
	(Continuous Snapshot Recording)	80 minutes (480 shots)
	(Continuous Snapshot Recording)

	Continuous Playback*2	120 minutes

Supported Battery: NP-20 (Rated Capacitance: 680mAh)

*1 Continuous Recording Conditions

•Normal temperature: 25° C (77° F)

•Flash: Off

•Monitor screen: On

•Image recorded about every 10 seconds

*2 Continuous Playback Conditions

•Normal temperature: 25° C (77° F)

•Scroll one image about every 10 seconds

•Recording one image per minute under the above conditions reduces battery life to about one sixth of that noted above.

•The above values are based on a new battery starting from a full charge. Repeated charging shortens battery life.

•Battery life is greatly affected by how much you use flash, zoom and other functions, and how long you leave power turned on.

29

Contents

Page INTRODUCTION Unpacking Contents 41BASIC IMAGE RECORDING 51OTHER RECORDING FUNCTIONS 70 PLAYBACK DELETING FILES FILE MANAGEMENT 97 OTHER SETTINGS 107 USING A MEMORY CARD 112VIEWING IMAGES ON A COMPUTER 127USING THE CAMERA WITH A COMPUTER 142 APPENDIX IMPORTANT ■Copyright Restrictions Features Page Precautions General Precautions Data Error Precautions Operating conditions Condensation LED Backlight Lens Other QUICK START GUIDE First, charge the battery To configure display language and clock settings To record an image To view a recorded image To delete an image GETTING READY About This Manual ■Terminology ■Button Operations ■On-screenText Camera ■Front ■Back ■Bottom USB Cradle Monitor Screen Contents REC mode PLAY mode Changing the Contents of the Monitor Screen Indicator Lamps Attaching the Strap Power Requirements To load the battery To charge the battery 2.Turn off the camera 3.Set the camera onto the USB cradle 4.After charging is complete, remove the camera from the USB cradle ■If the camera works normally ■If the camera does not work normally ■Battery Life Guidelines ■Tip to Make the Battery Last Longer ■Low Battery Indicator Power Supply Precautions ■Battery Handling Precautions Page ●PRECAUTIONS DURING USE ●BATTERY STORAGE PRECAUTIONS ●USING THE BATTERY ■USB Cradle and AC Adaptor Precautions Turning the Camera On and Off Auto Power Off (APO) Using the On-screenMenus 2.Press [MENU] ●Menu Screen Operations Page Configuring Display Language and Clock Settings To configure display language and clock settings 6. Use [] and [] to 8. Press [SET] to register the settings and exit change the date format the setting screen setting, and then press BASIC IMAGE RECORDING Recording an Image About the REC Mode Monitor Screen Recording Precautions Using Zoom 5.In the REC mode, use [] and [] to change the digital zoom factor 6.Record the image Using the Flash ■About Red-eyeReduction Flash Precautions Using the Self-timer Page Specifying Image Size and Quality To specify the image size To specify image quality