Casio 10M30BR DIP Switch Setting For HA-C61IO, Host Computer Interface, Daisy Chain Termination

2.3 DIP Switch Setting (For HA-C61IO)

The DIP switch is located on the rear side of the Bridge Satellite Cradle (HA-C61IO). Change the ON/OFF settings according to your required system configuration. The new settings do not go into effect until the power switch is turned off and then back on again.

ON (Upper side)

OFF (Lower side)

Not used (always OFF)

Not used (always OFF)

Host Computer Interface

Switch Number	6
RS-232C	OFF
USB	ON *

Daisy Chain Termination

Switch Number	5
Intermediate Connection	OFF
Daisy Chain Off/Termination	ON *

Connection

Switch Numbers	3	4
Host Computer	OFF *	OFF *
Daisy Chain	ON	OFF

Inter-Cradle Data Rate (RS-422 Comm. speed)

Switch Numbers	1	2
115, 200 bps	ON *	OFF *

* : Default setting.

Fig. 2.2

Note:

Other DIP switch settings are used for testing and inspection purposes. Because of this, you should never use any DIP settings other than those described above.

23