Casio IT-10M20, 10M30BR manual General

6.2.2 General

•Be aware of abnormal conditions.

If the IT-10 is continuously used in an abnormal condition, a fire or electric shock may occur. If there is an abnormality, immediately turn off the Power switch, and be sure to remove the batteries and then contact a CASIO distributor for repair.

•Supply Current/Voltage

•Do not use anAC adaptor withAC voltage not rated on theAC adaptor.Also, avoid drawing power from Do not damage, break, retrofit, bend, twist, or stretch the power cable.Also, do not place a heavy object on it or heat it. If this is done, the power cable may be broken and cause a fire or electric shock.

•AC adaptor

Always use the dedicatedAC adaptor (AD-S15050AE). If anAC adaptor that is not specified is used, the battery pack may explode, causing a fire or personal injury.

•Do not touch theAC adaptor with wet hands.

This may result in an electric shock.Also, place theAC adaptor in a place where it is not subject to dust and water. Dust and dirt may cause fire and smoke, and water may cause an electric shock.

•About the electrolyte

If the internal electrolyte of the battery leaks and enters the eye, rinse it with a sufficient amount of water, then consult with a doctor

•About the battery pack

1.Do not place the battery pack in a microwave oven or high-pressure container. If this is done, the battery pack will be quickly heated or the contact seal may be broken causing it to become hot, smoke, explode, or ignite.

2.If you are aware of an abnormal condition such as a smell, excessive heat, discoloration, deformation, etc., during use, charging and storage of the battery pack, immediately remove it from the IT-10 and do not use it anymore. If it continuously used without proper treatment, the battery pack may become hot, smoke, explode, or ignite.

3.If charging cannot be completed even after the specified charging period, stop the charge operation. Otherwise, the battery pack may become hot, smoke, explode, or ignite.

4.If the battery pack leaks or generates an abnormal smell, immediately remove it away from the fire. Otherwise, the electrolyte that has leaked may ignite causing smoke, an explosion, or fire.

5.Do not disassemble the battery pack. Neither disassemble nor retrofit this terminal. Personal burns or injury may occur.

•About the power cable andAC adaptor

1.Do not bring the power cable close to heating equipment such as stove. The cable coating may burn or melt, resulting in fire or electric shock.

2.Do not bring the power cable close to a container filled with liquid. If the cable becomes wet or should the container be tipped over, a fire or electric shock may result.

3.Do not unplug theAC adaptor by pulling the power cable by hand. The cable may be damaged causing a fire or electric shock.Always hold the plug of the cable.

4.When cradle or battery charger is not used for an extended period of time, e.g. during absences, unplug theAC adaptor from the wall outlet.

42