Casio 10M30BR, IT-10M20 manual Power is on and the terminal is correctly mounted on the Cradle

Table 1.6 Names of parts

No.	Part Name		Description
1	IrDAcommunication	Align this port with the IrDAcommunication port of the terminal for data
	port	transfer via the IrDAinterface.
2	Detection switch	This switch detects when the terminal is correctly mounted on the Bridge
		Satellite Cradle.
3	Status lamp	“POWER”
		Indicates the power status.
		Off	: Power is off.
		Green	: Power is on and the terminal is correctly mounted on the Cradle.
		Red	: Power is on, but the terminal is not correctly mounted on the
			Cradle.
		“DATA”
		Indicates the communication status.
		Off	: No communication.
		Flashing green : Communication between the terminal and a PC is
			established.
		Red	: Connection problem in the Cradle.
		“LINE”
		Indicates the system status.
		Off	: The system is not operational.
		Green	: The system is operational.
4	Power terminals	These terminals supply power to the terminal mounted on the Cradle.
5	Power switch	Turns on the power on the Cradle.
6	Power adaptor port	Connect the dedicatedAC adaptor (AD-S42120AE) to this port.
7	RS-422 ports	Use these two ports (“C-OUT” and “C-IN”) when connecting up to eight
		Bridge Satellite Cradles in series.
8	RS-232C port	Use this port when connecting the terminal and a PC via the RS-232C interface.
9	USB port	Use this port when connecting the terminal and a PC via the USB interface.
10	DIP switches	Use these switches to configure the settings on the Cradle.

13