Specifying the File Name Serial Number Generation Rule

Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 179).

1.Press [MENU].

2.On the “Set Up” tab, select “File No.” and then press [X].

3.Use [S] and [T] to select the setting you want and then press [SET].

Changing the Camera Date and Time Setting

When changing the date and time setting, be sure to do so for your Home City (the location where you normally use the camera). If you already have your Home City setting configured correctly, you can use the procedure under “Setting the Date and Time for Your Home City” (page 193) to change the current time setting only, if you want.

IMPORTANT!

• Changing the time and date setting without correctly

configuring your Home City setting first will cause all of the

To have the camera do this:

Select this setting:

World Time (page 194) dates and times to be off.

■

Remember the current number and

always assign the next one, even if all

Continue

files are deleted or if the memory card is replaced.

Restart the serial number from 0001

whenever all files are deleted or the Reset memory card is replaced.

Selecting Your Home City

1.Press [MENU].

2.On the “Set Up” tab, select “World Time” and

then press [X].

This displays the current World Time settings.

192

OTHER SETTINGS