3.Use [S] and [T] to select the setting you want and then press [SET].
To configure both keys to do | Select this setting: | |
this when pressed: | ||
| ||
Turn on the camera | Power On | |
|
| |
Turn on or turn off the camera | Power On/Off | |
|
| |
Do not turn on the camera | Disable | |
|
|
NOTE
•With “Power On/Off”, the camera turns off when you press [ 
] (REC) in the REC mode or [ 
] (PLAY) in the PLAY mode.
•Pressing [ 
] (PLAY) while in the REC mode or [ 
] (REC) while in the PLAY mode will switch to the applicable
mode (REC or PLAY).
•Pressing [ 
] (REC) or [ 
] (PLAY) while the camera is on switches immediately to the applicable mode (REC or
PLAY), even if you are performing a menu operation.
•The initial factory default for this setting is “Power On”.
•Change this setting to anything besides “Disable” before connecting to a TV for image viewing.
198
OTHER SETTINGS