If the camera works normally | Casio K855PCM1DMX manual

GETTING READY

■If the camera works normally

1.Continue using the camera until the current charge is used up, and then charge the battery.

■If the camera does not work normally

This can mean there is a problem with how the battery is loaded.

1.Remove the battery from the camera and check the battery contacts for dirt. If the contacts are dirty, wipe them clean with a dry cloth.

2.Check to make sure that the AC adaptor’s power cord is connected securely to the power outlet and USB cradle.

•If the same symptoms occur again when you place the camera on the USB cradle after taking the above steps, contact a CASIO authorized service center.

■Battery Life Guidelines

The battery life guideline values given below indicate the amount of time at standard temperature (25° C (77° F)) until power automatically turns off due to battery failure. They do not guarantee that the battery will provide the amount of service indicated. Low temperatures and continued use reduce battery life.

	Operation	Approximate Battery Life

	Continuous Recording*1	75 minutes (450 shots)
	(Continuous Snapshot Recording)	75 minutes (450 shots)
	(Continuous Snapshot Recording)

	Continuous Playback*2	120 minutes

Supported Battery: NP-20 (Rated Capacitance: 680mAh)

*1 Continuous Recording Conditions

•Normal temperature: 25° C (77° F)

•Flash: Off

•Monitor screen: On

•Image recorded about every 10 seconds using the following operations: Zoom to full wide angle Auto Focus Zoom to full close-up Auto Focus Image recording

*2 Continuous Playback Conditions

•Normal temperature: 25° C (77° F)

•Scroll one image about every 10 seconds

30

Image 30

Casio K855PCM1DMX manual If the camera works normally, If the camera does not work normally, Battery Life Guidelines

Contents

EX-Z3 Introduction Unpacking Contents Using the Self-timer Specifying Image Size and Quality Using ZoomUsing the Flash Selecting the Focus Mode Displaying the Calendar Screen Setting the Clock 112Using World Time 114 Rotating the Display Image Using the Camera with a Macintosh Computer 129 Using a Memory Card 119Using the Camera with a Windows Computer 124 Using the Album Feature 139 154 Indicator Lamp Reference 156Troubleshooting Guide 159 163 Copyright Restrictions Features Introduction General Precautions Precautions Data Error Precautions Operating conditions Condensation LED Backlight LensOther Place the camera onto the USB cradle to charge the battery First, charge the batteryLoad the battery It takes about two hours to achieve a full charge To configure display language and clock settings 4, 5, 6, 7, 8 See page 43 for details To record an imageTo view a recorded image See page 80 for details To delete an image Press SET to delete the imageSee page 94 for details Button Operations About This ManualTerminology On-screen Text Front CameraGeneral Guide Back USB Cradle Bottom REC mode Monitor Screen Contents Play mode Digital zoom indicator Shutter speed value Changing the Contents of the Monitor Screen To load the battery Power RequirementsAttaching the Strap Stopper Arrow marks NP-20 Release the stopper and pull the battery from the camera To remove the batteryTo charge the battery Take care so you do not drop the battery Turn off the camera Set the camera onto the USB cradle Getting Ready Battery Life Guidelines If the camera works normallyIf the camera does not work normally Tip to Make the Battery Last Longer Low Battery Indicator Power Supply Precautions Battery Handling Precautions Precautions During USE USB Cradle and AC Adaptor Precautions Getting Ready Battery Storage Precautions Turning the Camera On and Off Performing any button operation causes Configuring Power Saving SettingsAmount of time in the REC mode Monitor screen to turn back on Using the On-screen Menus Use and to change the currently selected setting Instead of pressing , you could also press SET Configuring Display Language and Clock Settings To configure display language and clock settings Set the current date and the time Example October 23 Getting Ready Press the power button to turn on the camera Align the mode selector with RECRecording an Image Press the shutter release button half way to focus the image Make sure you are not Recording Precautions About the REC Mode Monitor Screen About Auto Focus Using the Optical Viewfinder REC mode, press the zoom button to Using ZoomOptical Zoom Change the zoom factor Digital Zoom REC mode, press Menu Press To select Using the FlashFlash mode Each press Cycles through the flash About Red-eye Reduction Record the image Flash Unit Status Red operation lamp Using the Self-timer Selecting Off in disables the self-timer Record the image To specify the image size Specifying Image Size and Quality To specify image quality