Casio KL-120 Error Messages/Display Messages, • Tape Cutting, •Using Labels, SET, ESC, SET, ESC, Page, Page, Page, E-26, Action, Action, Action, Action, Message

• Tape Cutting

Cannot cut tape.

Possible Causes	Action	Page
Tape cutter blade is dull.	Take the label printer to the dealer
	from whom you purchased it to have	—
	the tape cutter blade replaced.
Printed text is cut off by tape cut operation.
Possible Causes	Action	Page
Out of tape	Replace the tape cartridge with a new	E-9
	one.

•Using Labels

Label will not adhere to a surface.

Possible Causes	Action	Page
The backing paper is still	Peel the backing paper from the back	E-18
on the back of the tape.	of the tape to expose the adhesive.
Surface is unsuitable for	Labels do not adhere well to surfaces	E-18
affixing a tape.	that are rough, wet, oily, or dirty.

Error Messages/Display Messages

Message	Possible Causes	Action
TOO MANY	• The number carriage	• Use wider tape or reduce
LINES!	returns you input causes	the number of lines.
	the label to exceed the	6mm tape...1 line
	maximum number of lines	9mm tape...1 line
	for the tape you are	12mm tape...Up to 2 lines
	using.	18mm tape...Up to 2 lines
NO DATA!	• You are attempting to	• Store the text in memory
	recall text from memory	and then try again.
	when there is none
	stored.
OVERWRITE?	• You are attempting to	• Press SET to overwrite
SET/ESC	store text in memory	the existing text with the
	when it already contained	new text, or ESC to
	text.	cancel the store
		operation.
LOAD A TAPE	• You are attempting to	• Turn the power OFF and
CARTRIDGE	perform printing without	set the tape cartridge.
* This message	setting a tape cartridge.
also appears
when the tape
cartridge is
loaded correctly,
but “NONE” is
selected for the
tape width.
LOW BATTERY!	• Battery power is low.	• Replace the batteries.
LONGER THAN	• This message appears	• To print, press SET.
SET!	when the length of the	• To cancel printing, press
SET/ESC	tape that will actually be	ESC. You can then
	printed is longer than the	decrease the number of
	specified tape length.	characters, change to a
		longer tape setting, or
		select auto tape length.

E-26