Initializing the Label Printer

If you experience serious malfunction of the Label Printer or if operation fails completely, try performing the following operation to initialize the printer.

Important!

•Initializing the Label Printer deletes all memory contents. Make sure you have a back-up copy of text stored in memory if you need it.

To initialize the Label Printer

1.Turn power off.

2.While holding down the PRINT and SPACE keys, press ON/OFF to turn power on.

•This prompt confirms whether or not you want to initialize the Label Printer.

I N I T I A L I Z E ?

S E T / E S C

3.Release the PRINT, SPACE, and ON/OFF keys.

4.Press SET to initialize the Label Printer or ESC to abort the reset operation. The tape width selection screen appears after initialization is complete.

5.Use zand xto select the width of the tape you will use and then press SET.

Troubleshooting

• Power Supply

Nothing appears on the display.

 

Possible Causes

Action

Page

 

 

 

Battery power is low or

Load a fresh set of AA-size alkaline

 

the wrong type of

batteries (supplied by you).

E-8

batteries are loaded in

 

 

 

the printer.

 

 

 

 

 

Improper display contrast

Adjust display contrast.

E-22

setting

 

 

 

 

 

 

Batteries loaded

Remove batteries and reload them

E-8

incorrectly

correctly.

 

 

 

 

• Text Input

Cannot input text.

Possible Causes

Action

Page

 

 

 

FUNC key has been

Press ESC to clear FUNC key

E-10

pressed.

operation.

 

 

 

 

E-24