Casio KL-120 FIX, SET, ESC, TAPE, E-27, Action, ON/OFF, ON/OFF, Action, LENGTH, Message, Message, Possible Causes, Possible Causes, TAPE LENGTH setting

Message	Possible Causes	Action
DATA ERROR!	• Data in memory has	• Press any key besides
	become corrupted for	ON/OFF to clear the
	some reason.	error message. In
		response to the
		“INITIALIZE THE
		PRINTER!” message
		that appears, press any
		key besides ON/OFF to
		initialize the Label
		Printer.
NO INPUT TEXT!	• You are attempting a print	• Input the text and then
	or preview operation	try again.
	when no text are input.
PRINT ERROR!	• The tape became jammed	• Turn off the printer and
	during printing.	remove the tape
		cartridge. Next, remove
		the jammed tape.
		* If the steps described
		above do not clear the
		error message, contact
		your retailer or your
		nearest CASIO service
		center.
TOO MANY	• You are attempting to	• Reduce the number of
CHARACTERS!	input more than	characters in the
	80 characters into text.	sentence.
	• The number of characters
	you are trying to input
	while using Layout
	Prinitng exceeds the
	maximum number of
	allowable characters.

Message	Possible Causes			Action
TOO MANY	• You are attempting to			• Use only one or two
BLOCKS!	input more than two block			block marks (	B	) in a
	marks (	B	) into text.	single sentence.
LOAD A TAPE	• A 6mm or 9mm tape			• Turn off the printer and
12mm OR	cartridge was loaded in			replace the tape
WIDER	the printer while a 2-line			cartridge with one that is
	or 2-block format is			12mm or wider.
	selected for Layout
	Printing.
CLRS TAPE	• You are attempting to			• If you want to cancel the
LNGTH	input a block mark while			TAPE LENGTH setting
SET/ESC	FIX is selected for TAPE			and input a block mark,
	LENGTH.			press SET. If you do not
				want to input a block
				mark, press ESC.

E-27