Casio KL-120 •Printing, Page, Page, Page, Page, Page, E-25, Action, Action, Action, Action, Action, Important, Important, Possible Causes, Possible Causes, Possible Causes

•Printing

Tape does not come out when PRINT is pressed.

Possible Causes	Action	Page
Tape cartridge	Securely close the cover.
compartment cover is not		E-9
closed completely.
No more tape left in the	Replace the tape cartridge with a	E-9
cartridge.	new one.
Tape jam	Remove the tape cartridge and pull
	out the jammed tape by hand. Cut off
	excess tape with scissors, and
	carefully replace the cartridge into
	the label printer.	E-9
	Important!
	Never allow the tape outlet to
	become blocked and never touch
	tape as it is being fed during printing.

Tape comes out when PRINT is pressed, but nothing is printed on it.

Possible Causes	Action	Page
Only blank spaces were	Input the text you want to print.	E-10
input.
Printing is blurred, blotched, broken, etc.
Possible Causes	Action	Page
Improper print density	Adjust the print density setting.	E-22
setting
Improper loading of the	Remove the tape cartridge and	E-9
cartridge	reload it correctly.
Dirty printer head or	Clean the printer head and roller.	E-23
rubber roller

Printer powers down while printing is in progress.

Possible Causes	Action	Page
Battery power is low or	Load a fresh set of AA-size alkaline
the wrong type of	batteries (supplied by you).	E-8
batteries are loaded in
the printer.

Ink ribbon is being fed from the tape outlet along with the tape.

Possible Causes	Action	Page
Tape cartridge loaded	Remove the tape cartridge and check
while the ink ribbon is	to make sure the ink ribbon is not
slack.	broken. Next, take up any slack in the
	ink ribbon and then reload the tape
	cartridge.

Important!

• Before loading a tape cartridge into E-9the label printer, always make sure

you take up any slack in the ink ribbon first.

•If the ink ribbon is broken, you must change to another tape cartridge.

E-25