To recall text from memory
1. While the input screen is on the display, press MEMORY.
•Note that text recalled from memory will replace any text currently on the display.
2. Press zand xto select RECALL.
S T O R E
R E C A L L
3.Press SET.
4.Use zand xto select the text you want to recall and then press SET.
•If all of the text does not fit on the display, you can use cand vto scroll it to the left and right.
5. Press SET to recall the text from memory.
•Note that recalling data from memory replaces anything that is currently on the input display. Memory text cannot be appended.
To delete stored data
1.While the input screen is on the display, press MEMORY.
2.Press zand xto select DELETE.
R E C A L L
D E L E T E
3.Press SET.
4.Use zand xto select the data you want to delete and then press SET. This will display the message “DELETE? SET/ESC” to confirm.
5.Press SET to delete the data.
Part 10 Configuring the Printer Setup
The printer has a SET UP screen that you can use to configure a variety of basic settings.
To configure the printer setup
1.Press ON/OFF to turn on the printer.
2.Press FUNC and then 6 (SET UP).
3.Use zand xto select the SET UP item whose setting you want to change, and then press SET.
4.Use the cursor keys to change it.
When this setting | Change its setting like this: | |
is selected: | ||
| ||
|
| |
CONTRAST | • Use cand vto adjust the display contrast. | |
|
| |
DENSITY | • Use cand vto adjust the print density | |
| setting. | |
|
| |
LANGUAGE | • Use xand zto select the display language | |
| you want to use. | |
|
| |
cm/inch | • Use xand zto select centimeters (cm) or | |
| inches as the unit of measurement. | |
|
| |
TAPE WIDTH | • Use xand zto select the tape width you | |
| want to use. | |
|
|
5. Press SET to apply the setting.