2. Press L to change to the text recall prompt.

CAL?

3. Press SET.

ABCD

If all of the text does not fit on the display, you

can use Hand J to scroll it to the left and right.

 

 

 

Area 1 text

3. Press SET.

If all of the text does not fit on the display, you can use Hand Jto scroll it to the left and right.

4. Press L to change to Area 2.

Use K and L to switch between Area 1 and Area 2.

5.Press SET to recall the text from the area that is currently on the display.

Note that recalling data from memory replaces anything that is currently on the input display. Memory text cannot be appended.

To delete text from memory

1.While the input screen is on the display, press FUNCTION and then 1 (MEMO).

ABCD

Area 1 text

CASI

Area 2 text

CASI

STR?

4.

Use Kand L to select Area 1 or Area 2 then

OK?

 

press SET.

 

 

5.

Press SET to delete the text from the area that is currently on the display.

Part 8 Reference

This section contains information about the Label Printer that you can use as reference when you need it.

Replacing the Tape Cutter Blade

The tape cutter blade is designed to provide approximately 3,000 cuts. Use the following procedure to replace the blade whenever it starts to cut poorly.

To replace the tape cutter blade

1.Make sure that the Label Printer is switched off.

2.Open the tape cartridge compartment cover.

2. Press L twice to change to the text delete

prompt.

DEL?

E-14