Using Auto Sizing (AUTO)
1.Input the text.
2.Press FUNC 4 (SIZE) to display the size setting menu.
A U T O
M A N U A L
3.Make sure the pointer is aligned with AUTO and then press SET. Now the character size is automatically set.
To specify character sizes (MANUAL)
1.Input the text.
2.Press FUNC 4 (SIZE) to display the size setting menu.
3.Use zto move the pointer to MANUAL and then press SET.
– M A N U A L | – |
S I Z E : 3 | 3 |
– |
|
4. Specify the character size you want.
•Use cand vto move the underlining between the two dimensions.
•To change a dimension, press zto increase it or xto decrease it.
•Remember that the dimensions you can specify depend on the width of the tape loaded in the label printer (see table, above).
5.When the character size you want to specify is on the display, press SET to select it and return to the text display.
Note
•You could also perform the above procedure in reverse, specifying the character size first and then inputting the text.
Text Effects
There are three text effects that you can assign: shading, underlining, and boxed text. The following shows examples of each.
Shading:
Underlining:
Boxed Text:
Text effect changes are applied to printed text only. The appearance of the displayed text does not change, but the text effect indicators will show you when a text effect is being used.
Important!
•Any text effect specification you make is applied to all the characters on the display. You cannot make multiple specifications for specific characters.
•You can use the Shading, Underline, and Box effects in combination with each other, and even specify all three at the same time.
To specify a text effect
1.Input the text.
2.Press FUNC 5 (EFFECT) to display a menu of text effects.
C A N C E L
S H A D I N G
3.Use zand xto move the pointer to the effect you want to use.
4.When the pointer is located at the effect you want to specify, press SET to select it and return to the text display.
Note
•You could also perform the above procedure in reverse, specifying the text effect first and then inputting the text.