Initial Power On Settings

The following are the initial settings of the Label Printer whenever you turn it power on.

 

Item

Power On

 

 

 

6mm tape...1 ⋅ 1

SIZE

 

AUTO SIZE

9mm tape...2 ⋅ 2

 

 

 

12mm, 18mm tapes...3 ⋅ 3

EFFECT

 

 

CANCEL

STYLE

 

 

NORMAL

MIRROR

 

 

NORMAL

Initializing the Label Printer

If you experience serious malfunction of the Label Printer or if operation fails completely, try performing the following operation to initialize the printer.

Important!

•Initializing the Label Printer deletes all memory contents. Make sure you have a back-up copy of text stored in memory if you need it.

To initialize the Label Printer

1.Turn power off.

2.While holding down the PRINT and ESC keys, press ON/OFF to turn power on.

• This prompt confirms whether or not you want to initialize the Label Printer.

I N I T I A L ?

S E T ⁄ E S C

3.Release the PRINT, ESC, and ON/OFF keys.

4.Press SET to initialize the Label Printer or ESC to abort the reset operation.

•The following table shows the initial settings.

 

 

 

 

Item

 

 

Reset

 

 

 

 

Display

 

 

Cleared

 

 

 

 

Memory

 

 

Cleared

 

 

 

 

SYMBOL

 

 

,

 

 

 

 

SIZE

 

 

 

AUTO

 

 

 

 

EFFECT

 

 

CANCEL

 

 

 

 

STYLE

 

 

NORMAL

 

 

 

 

MIRROR

 

 

NORMAL

 

 

 

 

MEMO

 

 

STORE

 

 

 

 

DENSITY

 

 

3

 

 

Bar Code initial setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item

 

 

Reset

 

 

 

 

Menu

 

 

 

EAN-13

 

 

 

 

Text

 

 

 

Cleared

 

 

 

 

Size

 

 

 

M (MEDIUM)

 

 

Bar Code Specifications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Automatically

 

 

Bar code

Check

 

Print

Input

Assigned

 

Input

Type

Digit *1

 

Digit *2

Digits *3

Number of Digits

Characters

 

 

 

 

 

 

 

(Check Digit *1)

 

 

 

 

 

 

 

 

 

 

 

EAN-13

 

Yes

 

13

12

 

1

Numerals (0 ~ 9)

 

 

 

 

 

 

 

 

 

EAN-8

 

Yes

 

8

7

 

1

Numerals (0 ~ 9)

 

 

 

 

 

 

 

 

 

 

*1 The check digit is automatically calculated in accordance with input data. For EAN-13 and EAN-8, the check digit is appended at the end of the printed digits.

*2 The number of digits printed below a bar code equals the input characters plus automatically appended characters.

*3 An error message is displayed whenever there are insufficient digits. The unit will not allow input of too many digits.

E-21