To load the batteries

Caution

•Do not touch the springs inside the battery compartment cover with your fingers while loading or replacing batteries. The springs have sharp areas and can cut your fingers.

1.Turn power off.

•If you are using the optional AC adaptor for power, you should also unplug it from the Label Printer.

2. Turn over the Label Printer.

Open the battery compartment cover as shown in the illustration.

3. Load batteries into the battery compartment.

• Be sure to use alkaline batteries.

• Make sure the positive (+) and negative (–) ends of the batteries are facing in the correct directions.

4. Replace the battery compartment cover.

AC Adaptor

Note the following important precautions when using an AC adaptor to power your Label Printer.

•Use only a genuine CASIO AD-A95100 AC adaptor with the same voltage rating as the household current in your area. Using a wrong adaptor can damage your Label Printer.

•Be sure to turn the Label Printer off before you connect the adaptor. Do not turn power on until the adaptor is connected to the Label Printer and plugged into and AC outlet.

•Be sure to unplug the AC adaptor from the AC outlet whenever you are not using the Label Printer.

To connect the AC adaptor

Connect the adaptor to the Label Printer as shown in the illustration. Plug the other end into a standard household AC outlet.

Turning Power On and Off

Press ON/OFF to turn power on and off.

Important!

•If you are using the Label Printer for the first time, you should reset it first.

E-7