•An easy way to remove the backing from a tape and expose the adhesive surface is to bend the tape near one of its ends. This should cause the

tape and its backing to separate, allowing you to pull them apart.

Mirror Image Printing

When you specify mirror image for text, it is printed in reverse image. Use mirror image when you plan to print on transparent tape, with the printing on the inside. When viewed through the transparent tape, the text will appear normal. You can also use mirror image printing when using iron-on transfer tape to print iron- on transfers.

Normal

Mirror Image

To turn mirror image printing on and off

1. Press FUNC and then 8 (MIRROR).

N O R M A L

MI R R O R

2.Press zor xto change the setting shown on the display between MIRROR and NORMAL.

3.When the mirror image printing setting is the way you want it, press SET to register it.

•A mark appears next to the MIRROR indicator on the display when mirror printing is turned on.

•After you turn printing on, input text and perform the print operation as you normally do to produce mirror image tapes.

Print Density

The print density setting controls how darkly figures are printed on your tapes.

To adjust the print density

1.Press FUNC and then 9 (DENSITY).

–D E N S I T Y –

1

2

3

4

5

 

 

–

 

 

2.Use cand vto move the underlining to the density setting that you want.

• The lightest setting is 1, while the darkest setting is 5. The standard setting is 3.

3.When the density setting is the way you want it, press SET to register it.

E-17