All Text Operations
The procedures in this section control the following parameters for all of the text on the display.
•Mirror printing (mirror, normal)
•Proportional character spacing (on, off)
•Smoothing (on, off)
•Block space (none, narrow, wide)
•Feed (long, short, manual)
•Tape length (auto, fixed)
•Block alignment (left, center, right, uniform spacing)
Use the BLOCK FORM menu to perform block operations.
To display the ALL FORM menu
1.While there is text on the display, press FORM.
2.Use u and i to move the highlighting to “ALL FORM” and then press SET.
– – – – – A L L – – – – – –
M I RROR
PROPORT I ONA L ON
SMOOTH I NG | ON |
B L | NARROW |
FEED | LONG |
•Use u and i to move the highlighting between menu items.
•The ALL FORM menu has two pages. Press SET while the first page is displayed to change to the second page. Pressing SET while the second page is displayed regis- ters any settings with the menu and returns to the text input screen.
•Use t and y to change between settings of the currently selected (highlighted) item.
•The following explanations describe each of the ALL FORM menu items in detail.
MIRROR/NORMAL
MIRROR
NORMAL
PROPORTIONAL
ON
OFF
SMOOTHING
ON
OFF
BLOCK SPACE
NONEWIDE
NARROW
FEED
You can also one of two different feed settings that provides either long or short side spaces (“Fundamentals of Label Layout”). You can also specify manual feed.
LONG
This setting causes the tape to feed 16.5mm at the beginning and end of each printing.
SHORT
This setting causes the tape to feed 3mm at the beginning and end of each printing.
MANUAL
This setting provides side spaces of only 1mm of the printed text. If you perform two consecutive print operations (without manually feeding between prints), the last character of the first print operation is followed by the first character of the second print operation, with no space provided between them. It is a good way to save tape when you print a series of tapes.
Important! After you finish printing when using manual feed, be sure to always press FUNC and then FEED to feed the tape before cutting it. If you don’t you will cut off part of the printed text.
TAPE LENGTH
Select “FIX” if you want so specify a fixed tape length in the range of 0.0 cm to 99.9 cm. Specify “AUTO” for this option if you want the label printer to automatically adjust the length of the tape.
BLOCK ALIGN
LEFT
RIGHT
CENTER
EQUAL