Casio KL-8200 Bar Code Specifications, Troubleshooting, •Power Supply, •Text Input, FUNC, E-31, Action, Action, Action, Important, Possible Cause, Possible Cause

Bar Code Specifications

				Automatically
				Assigned
Bar Code	Check	Print	Input Digits	Number of
				Digits		Input Characters
Type	Digit *1	Digits *3	*4
					Check	*8
					Digit
					*1
EAN-13	Yes	13	12	—	1	Numerals
EAN-8	Yes	8	7	—	1	Numerals
UPC-A	Yes	12	11	—	1	Numerals
UPC-E	(Yes) *2	6	6	—	—	Numerals
	No	4 to 22	4 to 22 (even only) *5	—	—	Numerals
ITF
	Yes	4 to 22	3 to 21(odd only) *6	—	1
	No	4 to 22	2 to 20	2 *7	—	Alpha-numeric characters; hyphen; period;
						space; dollar sign; slash; plus sign; percent
CODE39
						sign
	Yes	4 to 22	1 to 19	2 *7	1
	No	4 to 22	4 to 22	—	—	Numerals; hyphen; period; dollar sign; colon;
						slash; plus sign; letters A through D (first and
CODABAR
						final digits only) *9
	Yes	4 to 22	3 to 21	—	1

Troubleshooting

•Power Supply

Nothing appears on the display.

Possible Cause	Action
Improper display con-	Adjust display contrast.
trast setting
AC adaptor is not con-	Make sure the AC adaptor is
nected correctly.	connected correctly.

•Text Input

Cannot input text.

Possible Cause	Action
FUNC key has been	Press ESC to clear FUNC key
pressed.	operation.
Tape does not come out when PRINT is pressed.
Possible Cause	Action
Tape cartridge com- Securely close the tape car-
partment cover is not	tridge cover.
closed completely.
No more tape left in	Replace the tape cartridge with
the cartridge.	a new one.
Tape jam	Remove the tape cartridge and

*1 The check digit is automatically calculated in accordance with input data. For EAN-13, EAN-8, UPC-A, and ITF, the check digit is appended at the end of the printed digits. For CODE39 and CODABAR, the check digit is appended one digit before the final digit (when a check digit is used).

*2 UPC-E includes a check digit, but it is not printed as a numeral below the bar code.

*3 The number of digits printed below a bar code equals the input characters plus automatically appended char- acters.

*4 An error message is displayed whenever there are insufficient digits. The unit will not allow input of too many digits.

*5 An error message appears and printing is impossible if an odd number of digits are input when an ITF check digit is not being used. Append a zero to the beginning of the digits and re-input.

*6 An error message appears and printing is impossible if an even number of digits are input when an ITF check digit is being used. Append a zero to the beginning of the digits and re-input

*7 Both the start code and end stop code of CODE39 must be asterisks.

*8 An error message appears and printing is impossible if any characters other than those specified here are used.

*9 With CODABAR, A, B, C, or D can be used as the start code and stop code. An error message appears and printing is impossible if any other character is used.

pull out the jammed tape by

hand. Cut off excess tape with

scissors, and carefully replace

the cartridge into the label printer.

Important!

Never allow the tape outlet to

become blocked and never

touch tape as it is being fed

during printing.

E-31