Casio KL-60, KL60L, KL60SRUST Error Messages, ∙ Tape Cutting, ∙ Using Labels, E-16, Action, Action, Action, Action, Message, Cannot cut tape, Possible Causes, Possible Causes

∙ Tape Cutting

	Cannot cut tape.
Possible Cause	Action
Tape cutter blade is dull.	Take the label printer to the dealer from whom
	you purchased it to have the tape cutter blade
	replaced.
Printed text is cut off by tape cut operation.
Possible Causes	Action
Out of tape	Replace the tape cartridge with a new one.

∙ Using Labels

Label will not adhere to a surface.

Possible Causes	Action
The backing paper is still	Peel the backing paper from the back of the
on the back of the tape.	tape to expose the adhesive.
Surface is unsuitable for	Labels do not adhere well to surfaces that are
affixing a tape.	rough, wet, oily, or dirty.

Error Messages

Message	Possible Causes	Action
BATT	∙ Battery power is too low.	∙ Replace batteries.
ERR!	∙ Attempt to input two B	∙ Use only one Bmark.
* This message	marks within the same	Only two lines of text can
	text.	be input, so text can
appears on the
		contain only one B
screen for about
		mark.
one second.
	∙ Attempt to input Bmark	∙ Do not use Bmarks.
	while 6mm is specified as	6mm tape can have only
	the tape width.	one line of text, so text
		cannot contain any B
		marks.
	∙ Label text containing a	∙ Delete the Bmark to
	Bmark was input and	print on 6mm tape or
	then tape width specifica-	switch back to a wider
	tion was changed to	tape.
	6mm. (ERR! message
	appears when you try to
	perform a print operation.)
	∙ Attempt to recall call text
	from memory when
	memory is empty.
	∙ Attempt to store text into
	memory when there is no
	text on the input display.
ERR!	∙ Memory data has become	∙ Initialize the Label
	corrupted for some	Printer.
	reason.
Perr	∙ Tape jam during printing.	∙ Turn off power, remove
(Printer Error)		the tape cartridge, and
		clear the tape jam. If the
		printer error message
		reappears after you clear
		the tape jam, request
		servicing from your
		original dealer.

E-16