IMPORTANT!

•When the “Interval Movie” scene is selected, the shooting time setting is fixed at 5 seconds.

•The sleep (page 144) and Auto Power Off (page 145) are disabled while an interval shooting operation is in progress.

•Pressing any of the camera’s buttons while an interval shooting operation is in progress will cause the message “Interval shooting cancelled.” to appear and the interval operation will be canceled.

•The interval setting is the time from when the last shooting operation was complete until the next shooting operation starts. Certain camera settings and/or shooting conditions may cause the actual interval and shooting time to be somewhat different from those you specify.

•Shooting conditions can make it impossible to shoot the specified number of images.

Isolating Moving Subjects (Multi-motion Image)

Multi-motion Image can be used to isolate a moving subject within a series of multiple images and places them against a stationary background. Make sure that the camera is not moving or shaking when shooting with Multi-motion Image.

1.Press [BS] and then select the “Multi-motion Image” scene.

2.Press the shutter button to start shooting.

Continuous Shutter shooting will stop after some time, and the resulting composite image will appear on the monitor screen.

•Keep the camera still until all of the continuous shutter images are recorded.

•When using this feature, image size is fixed at 3M (2048x1536 pixels).

IMPORTANT!

•When shooting under bright conditions, the resulting image may appear brighter than when shooting a normal snapshot.

64

Using BEST SHOT