Zoom factor Image area
Current display area

4.Use [4] and [6] to display the CS group you want to divide up.

5.Use [8] and [2] to select “Divide” and then press [SET].

•To divide up other CS group files, repeat steps 4 and 5.

.Dividing Up All CS Groups

1.While a CS group is displayed, press [MENU].

2.Use [4] and [6] to select the “PLAY” tab.

3.Use [8] and [2] to select “Divide Group” and then press [6].

4.Use [8] and [2] to select “Divide All Groups” and then press [SET].

5.Use [8] and [2] to select “Yes”, and then press [SET].

•Once a CS group is divided, it cannot be regrouped.

Zooming an On-screen Image

1.In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed.

2. Press the zoom button z ([) to zoom.

You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. Press the zoom button w to unzoom the image.

–When monitor screen contents are turned on, a graphic in the lower right corner of the screen shows what part of the zoomed image is currently displayed.

–To exit the zoom screen, press [MENU] or [BS].

–Though the maximum image zoom factor is 8X,

certain image sizes may not allow zooming up to the full 8X.

•Pressing [SET] will lock the current zoom factor for

the on-screen image. You can then use [4] and [6] to scroll between images, using the same zoom factor. Pressing [SET] again will unlock the zoom factor and allow you to use [8], [2], [4] and [6] to move around the currently displayed images.

90

Viewing Snapshots and Movies