Playing with Different Tones
NOTE
•Under initial default settings, DSP is on for the main tone, and layer and split are turned off. DSP can be applied to only one part as shown below.
| Main | Layer | Split |
| Tone | Tone | Tone |
Initial Defaults | On | Off | Off |
Layer Tone DSP On | Off | On | Off |
Split Tone DSP On | Off | Off | On |
•You can turn chorus on or off for each main tone, layer tone, and split tone part.
•You cannot turn reverb on or off for each main tone, layer tone, and split tone part.
Using the Piano’s Pedals
The digital piano is equipped with two pedal jacks, one for a damper pedal and one for a soft/sostenuto pedal.
Selecting the Pedal Function
Apedal connected to the piano’s PEDAL jack can operate as either a soft pedal or a sostenuto pedal. When you turn on the keyboard, the pedal is initially configured for soft pedal operation. You can perform the following operation to select either soft or sostenuto for the pedal operation.
1While holding down the FUNCTION button, use the keyboard keys shown below to select either soft or sostenuto.
Sostenuto:
Soft:
▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ |
C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8 |
Pedal functions
•Damper Pedal
Pressing the damper pedal while playing will cause the notes you play to reverberate for a very long time. When GRAND PIANO 1 is selected as the tone, using this pedal causes note to reverberate just like the pedal on an acoustic grand piano.
•Soft Pedal
Pressing this pedal while playing weakens notes played on the keyboard after the pedal was pressed, and makes them sound softer.
•Sostenuto Pedal
Only the notes of the keys that are depressed when this pedal is pressed are sustained until the pedal is released.
Adjusting the Effect Applied when the Damper Pedal is Pressed Half Way (With optional
You can specify to what extent the damper effect should be applied when you press the damper pedal half way. A setting in the range of 0 (no effect) to 42 (same effect as full press) can be specified.
1 | While holding down the FUNCTION | ||||||
| button, press one of the keyboard keys | ||||||
| shown below to specify the setting you | ||||||
| want. |
|
|
|
|
|
|
| ▲ |
|
|
|
|
|
|
| ▲ |
|
|
|
|
|
|
▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ |
C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8 |
: Decreases the effect
: Increases the effect
•To return the volume setting to its initial default, hold down the FUNCTION button and press
both of the keys at the same time.