Other Settings
Changing the Piano Key
Use this setting to raise or lower the overall key of the keyboard in semitone steps.
1 Holding down the FUNCTION button, press the TRANSPOSE buttons to raise or lower the overall key of the keyboard.
[ | ] : Raise |
[ | ] : Lower |
NOTE
•To return the piano key to C, hold down the
FUNCTION button and press the TRANSPOSE [ ] and [ ] buttons at the same time.
•After using Transpose to raise the keyboard to a high key, notes played at the highest range of the keyboard may not sound properly for certain tones.
Changing the Pitch of the Piano to Match Another Instrument
Use this setting to raise or lower the overall pitch of the piano. The setting range is plus or minus 50 cents (100 cents = 1 semitone) from the standard pitch of A4 = 440.0Hz.
1 | Holding down the FUNCTION button, | |
| press the TUNE buttons to raise or lower | |
| the overall pitch of the piano. | |
| [ | ] : Raise |
| [ | ] : Lower |
*Each press of the button changes the current setting by approximately 1 cents (1/100 semitone).
NOTE
•Holding down the FUNCTION button and pressing
the TUNE buttons [ ] and [ ] at the same time returns tuning to the standard A4 = 440.0Hz.
Using Digital Piano Setup Memory
When setup memory is turned on, the digital piano will remember its setup* whenever you turn it off. If you turn off setup memory, settings will be cleared when you turn off the digital piano.
Turning off the digital piano while in the rhythm mode
The next time you turn on the digital piano,
Turning off the digital piano while in the user song mode
The next time you turn on the digital piano, the following settings will be configured in accordance with setup memory.
Rhythm selection, accompaniment volume, keyboard touch, pedal type, damper pedal setting, layered tone volume balance, split point, send channel, accomp MIDI out
1While holding down the FUNCTION button, press one of the keyboard buttons shown below to turn setup memory on or off.
On:
Off: 
▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ |
C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8 |
Using MIDI
What is MIDI?
The letters MIDI stand for Musical Instrument Digital Interface, which is the name of a worldwide standard for digital signals and connectors that makes it possible to exchange musical data between musical instruments and computers (machines) produced by different manufacturers.
NOTE
•For detailed information about MIDI Implementation, visit the CASIO website at: http://world.casio.com/.