20 Patch Parameters
The main function of patch parameters is to configure the settings of the sound source of a device.
20.1Master Tune Parameters
These parameters configure the Master Tuning Settings.
Parameter | ID | R/W | Block | Size | Array | ||
Master Fine Tune8 | 0001 | R/W | 000000 | 8 | 01 | ||
Master Coarse Tune | 0002 | R/W | ↑ | 7 | 01 | ||
Stretch Tune Enable | 0003 | R/W | ↑ | 1 | 01 | 0...Disable | |
|
|
|
|
|
|
| 1...Enable |
20.2Master Mixer Parameters
These parameters configure the Master settings of the mixer.
Parameter | ID | R/W | Block | Size | Array | Description | |
Master Volume | 0012 | R/W | 000000 | 7 | 01 | ||
Master Pan | 0013 | R/W | ↑ | 7 | 01 | ||
Acou Reso To Chorus | 0016 | R/W | ↑ | 7 | 01 | ||
Acou Reso To Reverb | 0018 | R/W | ↑ | 7 | 01 | ||
Acou Reso Return | 0019 | R/W | ↑ | 7 | 01 | ||
Chorus To Reverb | 001D | R/W | ↑ | 7 | 01 | ||
Chorus Return | 001E | R/W | ↑ | 7 | 01 | ||
Reverb Return | 0025 | R/W | ↑ | 7 | 01 | ||
Dsp Cancel | 0028 | R/W | ↑ | 1 | 01 | 0...Normal | |
|
|
|
|
|
|
| 1...Cancel |
20.3System Chorus Parameter
Parameter | ID | R/W | Block | Size | Array | Description | |
Cancel | 0050 | R/W | 000000 | 1 | 01 | 0...Normal | |
Type | 0051 | R/W |
| 7 | 01 | 1...Cancel | |
↑ | |||||||
Rate | 0052 | R/W | ↑ | 7 | 01 | ||
Depth | 0053 | R/W | ↑ | 7 | 01 | ||
Feedback | 0054 | R/W | ↑ | 7 | 01 | ||
Tone | 0055 | R/W | ↑ | 7 | 01 |
Note 1:
Selects the System Chorus preset type. Receipt of GM/GS Reset selects Chorus3. The value of this type is also linked to System Chorus parameters, and to the Chorus Send to Reverb and System Chorus Return Level parameters, and its setting causes these parameters to change to prescribed values. For details about the preset type list, see “26.8 Chorus Type Setting Value Table”.
35