Using Built-in Tones

3. Use the ck to cr (tone groups) buttons to select the group you want.

Example: To select the ORGAN group

Lit

4. Use the bt (w, q) buttons to select the tone you want.

Example: To select “002 Jazz Organ”

Tone number

Tone name

NOTE

Pressing q and w at the same time will jump to tone 001 of the currently selected group. Holding down either button changes the tone number at high speed.

See page E-40 for more information about scrolling.

Layering Two Tones

You can layer two different tones so they play at the same time when you press a keyboard key.

The first tone you select is called the “main tone,” while the second tone is called the “layered tone.”

1. Select the main tone.

Example: To select MELLOW PIANO in the CLASSIC group, press the cl (CLASSIC) button and then use the bt (w, q) buttons to select “002 Mellow Piano”.

2. Hold down the button of the group that contains the tone you want to select as the layered tone until “LAYER: ON” appears on the display as shown below for a few moments.

This will layer the tones currently selected in the two groups.

The button you held down in step 2 will light to indicate that it is selected.

Example: When BASS/GUITAR group is selected

Lit

3. Use the bt (w, q) buttons to select the tone you want in the group you selected in step 2.

Example: When “006 Picked Bass” is selected

Layered tone number

Layered tone name

4. To unlayer the tones and return the keyboard to a single tone, press any one of the tone group buttons.

NOTE

You can adjust the balance between the main tone and layered tone. For details, see “Layered Tone Volume (Layer Balance)” (page E-41).

E-10